Volvo vida dice body Scratch Repair Tips

1, regardless of what kind of volvo vida dice car will have a large or small scars. The scars on the table paint caused much damage? How can I fix? Must consider the correct method of disposal. If it is less visible scars, it is smart to do not worry about it.
    2 car abrasions, the best way to repair scars part is inserted with the same body coating agent. Coating agent can be coated once, twice, three times, the more the number, will be coated with more clean. However, the uniform treatment of the entire body is also very important.
 3, a small scar just very shallow scratches table paint immediately use mixture processing, wipe method is linear wipe. Scars disappear, with finer mixture wipe resort to waxing.
    4, scratches deeper scars, the focus is observed that the metal surface is exposed, If you can not see the metal surface will not rust, can concentrate coated with a varnish. With the nib points up, then other paint completely dry.
  Deep but slender scars, with colored putty can be mended well. Scars with the sandpaper, it should not scar autoboss v30  face to expand, is important to clean the dirt. Putty to carefully spread so completely into the interior. Finally painted mixture, waxing, the end of the work.
    Depression treatment is one of the most troublesome maintenance of the body work, it is important to lay the foundation, this step is done well, poor painting done extraordinarily effects. Painting, do not forget the newspaper cover a good around the paint will not spread to the surrounding.
    7, found rust immediately addressed, if left unchecked, rust spots will gradually expand. Prevent rust is to wipe with sandpaper, or used the rust point change in the chemical synthesis agent. Depending on the circumstances, were used.
8, doors, luggage pasted around waterproof strips off easily distorted. If there is no rupture, deformation, can once again be used simply paste it back, can prevent water leakage. Restore the elastic force of the rubber itself is also very important with a protective agent.
 9 bumper the scars processing method is slashing burrs, potholes partially coated putty to make it smooth. Special putty to prepare a variety of colors, select the closest color. With opcom op com  body-color bumpers.



http://elm327demi.blogspot.com/